Reverse Osmosis is used on water that contains less than 0.1
ppm of iron, less than 2000 ppm total dissolved solids, and less than
10 grains per gallon of total hardness. Reverse Osmosis works through
a technique called membrane separation. Raw water enters a module housing
the membrane element. Normal water pressure, or boosted pressure, forces
the water against the semi-permeable membrane and only clean water molecules
pass through the pores in the membrane. Impurities are rejected and flushed
away. When compared to distillers, a reverse osmosis system produces approximately
the same purity of water (98%) as distillation at approximately 1/10 the
cost, and the water tastes fresh and clean, where distilled water has a
very flat taste due to the method of production.
|
|
|
|
SYSTEM PRESSURE |
INCHES |
CM |
INCHES |
CM |
INCHES |
CM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| LP-ES100 100 GPD | $1737.40 120V PLUS SHIPPING |
| LP-ES200 200 GPD | $2037.40 120V PLUS SHIPPING |
| LP-ES425 425 GPD | $2595.40 120V PLUS SHIPPING |
| LP-ES550 550 GPD | $2821.95 120V PLUS SHIPPING |
MAXIMUM FEED WATER TEMPERATURE:
85F (29)C
FEED WATER PRESSURE:
35 PSI MINIMUM-85
PSI MAXIMUM
pH RANGE:
4.0- 10.0
TURBIDITY:
MUST BE REMOVED
IRON:
MAXIMUM TOLERANCE
0.5 PPM (DISSOLVED ONLY)
HARDNESS:
OVER 10 GPG SHOULD
BE SOFTENED
HYDROGEN SULFIDE: MUST BE REMOVED
SALT REJECTION: 98%
NOMINAL
ELECTRICAL: 120V,
60HZ ,----- 220V AVAILABLE (50HZ AVAILABLE ON REQUEST)
Compact Design
95%-99% TDS Reduction
Fully Automatic
Operation
Completely Assembled
And Pre Tested
Pre Filtration (10"
Standard Sediment Cartridge)
Post Filtration
(10" Standard Carbon Cartridge)
Easy maintenance
Simple On/Off Controls
High Pressure Gauge
Land Based
Epoxy coated Frame
Manual Flush Valve
Pre and Post Pressure
Gauges
TFC Membranes
Membrane Flush Valve
Water Relief Valve
High Pressure Switch
Low Pressure Switch
Reject Water Re-Circulating
Loop
Post Filtration
60Hz/120v Motor
Easy Hook-Up Includes:
RO-200 14 Gallon Tank & Fittings including: 3/8" dispensing Faucet,
Saddle Tap Valve
And drain saddle
tee! (Easy Installation Package) RO-200 Tank is 24 lbs and Tank Dimensions
are 15 3/8 Dia. X 22 3 1/16 High
LARGER TANK UPGRADES AVAILABLE FOR MORE STORAGE
REVERSE OSMOSIS PLANTS ARE CONSIDERED SPECIAL ORDER ITEMS.
REO PURE
RESIDENTIAL RO ROS-5
PORTABLE REVERSE
OSMOSIS
Call 973-293-7856
Fax 973-293-8056
View Our Guestbook
Sign Our Guestbook